DIGITAL SERVO DRIVE
High power density servo drive for applications up to 4 kW.
The Jupiter Servo Drive provides OEMs with the flexibility to utilize any motor technology up to 4 kW on its whole operating temperature range. Its power range can be even extended with an optional base plate or fan. The Jupiter is ready to interface EtherCAT or CANopen networks.
- High power density
- Multiple motors
- Multiple feedbacks
- Highly efficient
- CANopen and EtherCAT
- Ready to be integrated
- JUP-XX/80-X 3D Model
- JUP-XX/130-X 3D Model
- JUP-20/80-E 3D Model
- JUP-40/80-E 3D Model
- JUP-15/130-E 3D Model
- JUP-30/130-E 3D Model
|Continuous Current||40 ARMS|
|Peak Current||80 ARMS|
|Supply Voltage||10-130 VDC|
|Dimensions||100 x 100 x 26 mm|
|Communications||USB, RS232, RS485, CANopen, EtherCAT|
|Feedback||Digital Encoder, SinCos Encoder, Digital Hall, Analog Hall, SSI, DC Tachometer, Analog Input, PWM Encoder|
|Motor Type||DC Brushed, Rotary Brushless, Linear Brushless, Voice Coil|
|Command Source||Network Interface, Standalone, Analog Input, Step and Direction, Encoder Following, Electronic Gearing, PWM|
|Motion Mode||Profile Position, Profile Speed, Profile Torque, Cyclic Sync Position, Cyclic Sync Velocity, Cyclic Sync Torque, Homing, Open Loop Vector, Open Loop Scalar|
|Digital Inputs||2 PLC & TTL|
|Digital Outputs||2 PLC & TTL|
|Size (W x L)||100 x 100 mm|
One of the key advantages of INGENIA drives is their versatility. In this application an INGENIA drive was used to drive a linear voice coil actuator in position mode. At the same time, we used a low cost Raspberry PI and screen to control the INGENIA drive developing a program in less than a day with INGENIA's MCLIB.
- Quick development time
- Accurate positioning
- User friendly interface
The high power density of Ingenia's drives is a key factor to simplify mechanical design and reduce development and manufacturing costs of mechatronic solutions.
- Networked or standalone modes
- Compatible with any motor
- Configured in minutes
Get your project running with a set of open lead cables. The kit includes cables for all the connectors on the Ingenia Servo Drive.
- Open leads
- 50 cm lenght cables
- Micromatch connectors
The IO Starter Kit allows the rapid evaluation of the motion control capabilities with an easy and direct access to the I/O signals available on the servo drive. The module replicates the I/Os connector, adding analog signals, push buttons and DIP switches to reproduce any I/O operation that can be performed with the servo drive.
- Control your drive without a master
- Faster prototyping
- Easy connection
HAVEN'T FOUND WHAT YOU ARE LOOKING FOR?
Contact our engineers and find the right solution for your application.