DIGITAL SERVO DRIVE
A compact solution for all types of motors and feedbacks.
The Nix Digital Servo Drive is an ultra-compact solution providing top performance, advanced networking and built in safety, as well as a fully featured motion controller. The NIX can control multiple motor types and supports almost any feedback sensor including absolute serial encoders.
- Ultra low profile, high voltage variant.
- Free to download MotionLAB, programming and tuning software.
- Compatible with Brushed and Brushless DC and AC motors
- Compatible with Linear Brushless motors and Voice Coils.
- Integrated Motion Controller with Standalone Mode.
- Commanded through USB, CANopen, EtherCAT, RS485, PWM or Analog inputs.
|Continuous Current||10 ARMS|
|Peak Current||20 ARMS|
|Supply Voltage||10-170 VDC|
|Communications||USB, RS485, CANopen, EtherCAT|
|Feedback||Digital Encoder, SinCos Encoder, Digital Hall, Analog Hall, SSI, DC Tachometer, Analog Input, PWM Encoder|
|Motor Type||DC Brushed, Rotary Brushless, Linear Brushless, Voice Coil|
|Command Source||Network Interface, Standalone, Analog Input, Step and Direction, Encoder Following, Electronic Gearing, PWM|
|Motion Mode||Profile Position, Profile Speed, Profile Torque, Cyclic Sync Position, Cyclic Sync Velocity, Cyclic Sync Torque, Homing, Open Loop Vector, Open Loop Scalar|
|Enviroment||Industrial, Low Temperature|
|Digital Inputs||4 PLC & TTL|
|Digital Outputs||2 PLC & TTL|
|Size (W x L)||75 x 60 mm|
One of the key advantages of INGENIA drives is their versatility. In this application an INGENIA drive was used to drive a linear voice coil actuator in position mode. At the same time, we used a low cost Raspberry PI and screen to control the INGENIA drive developing a program in less than a day with INGENIA's MCLIB.
- Quick development time
- Accurate positioning
- User friendly interface
We have tested our servo drives with all major motor manufacturers and can guarantee compatibility with Servotecnica, Maccon, Maxon, Faulhaber, KAG, Dunkermotoren, ThinGap, Baldor, Baumuller, Bei, Crouzet, Exlar, Portescap, Micromo, Geeplus, H2W, Harmonic Drive, Moog, Parker and SMAC between others.
Contact your local rep for help selecting the right components for your system. They have plenty of available products that can easily pair with our drives.
The high power density of Ingenia's drives is a key factor to simplify mechanical design and reduce development and manufacturing costs of mechatronic solutions.
- Networked or standalone modes
- Compatible with any motor
- Configured in minutes
Get your project running with a set of open lead cables. The kit includes cables for all the connectors on the Ingenia Servo Drive.
- Open leads
- 50 cm lenght cables
- Micromatch connectors
The IO Starter Kit allows the rapid evaluation of the motion control capabilities with an easy and direct access to the I/O signals available on the servo drive. The module replicates the I/Os connector, adding analog signals, push buttons and DIP switches to reproduce any I/O operation that can be performed with the servo drive.
- Control your drive without a master
- Faster prototyping
- Easy connection
HAVEN'T FOUND WHAT YOU ARE LOOKING FOR?
Contact our engineers and find the right solution for your application.